Buon Vino Mini Jet   

Fall Bright, The Winemakers Shoppe

             Upon completion of filtration CLEAN the Mini Jet pump.

CLEANING AND USING THIS PUMP FOR RACKING – BY-PASSING THE PADS

1. Remove the short tube that had been placed on the fitting under the drip tray. Disconnect the short tube which leads from the pump to your first filtering plate and attach the drip tray tube to the outlet portion of the pump, leaving your intake tube connected to your pump.  You now have a direct line through your pump, bypassing the filter plates.

2. Pump clean cold water through your pump.  Place your intake tube into approximately 3 gallons of clean water and your out-take tube into an empty container.  Turn on the pump and flush.

3.  Unplug the motor.

4. Remove your filtering plates and hoses and clean.  When cleaning the drip tray be VERY CAREFUL not to get the motor wet.

5. On occasion place some petroleum jelly on the threaded portion of the two side bolts, keeping them lubricated.